Integrated Power Systems
The Integrated Power System (IPS) is a unique multifunction power supply which incorporates built-in battery back-up and numerous power accessories within a single 2RU (3.5″) chassis, thus eliminating time-consuming system integration, component sourcing and installation, while saving precious rack space–ideal for any low-to-medium power application requiring AC fault tolerant operation.
CONTACT US FOR ORDERING
Input: 115/230 VAC
Output: 12, 24, or 48 VDC
11 – 40 Amps with Internal Battery
A precision regulated power supply/charger, back-up battery, low voltage battery disconnect, output metering, LED status and Form C alarm contacts are all pre-wired and calibrated within the unit for plug-and-play operation. Plug-in terminals are provided for easy wiring of an additional parallel rectifier input, or external batteries for increased back-up capacity.
The batteries are always in-line with the load, thus there is no interruption from relays or transfer switches in the event of AC loss. Batteries are recharged when AC is restored. A manual battery disconnect switch allows internal or external battery service or replacement while the system is running. Models available for -48, +24 and +12 volt applications.
- Precision regulated power supply simultaneously maintains batteries at peak charge and supplies system load.
- Built-in batteries instantly power load during AC failure–no switch-over delay. 3-5 year average life. Terminals provided for additional external batteries for increased back-up capacity.
- Terminals provided for easy addition of parallel rectifier. (48V and 24V models only)
- Automatic low voltage and manual battery disconnect.
- Numerous front panel monitors–L.E.D. status indicators and digital ammeter/voltmeter.
- Form C summary failure alarm contacts; loss of internal rectifier output, loss of external rectifier output, LVBD contactor open. AC input failure alarm contacts optional.
- Numerous protection features–AC input breaker, internal battery breaker, auto thermal shutdown/recovery, current-limiting, short-circuit and over-voltage protection.
- 19″ or 23″, 6” forward rackmount brackets provided
Specifications: Integrated Power Systems
@ Full Load
115 / 230
|IPS 48-11||11 / 5.5||54.4||40-60 VDC||40 Amps||5 A-H||Positive||Positive|
|IPS 24-22||11 / 5.5||27.2||20-30 VDC||40 Amps||10 A-H||Negative||Negative|
|IPS 12-40||11 / 5.5||13.6||10-15 VDC||N/A||20 A-H||Negative||Negative|
Input Range (switch selectable):
115V = 92-130 VAC
230V = 184-260 VAC
Frequency: 47-63 Hz
Voltage/Amperage: See Matrix above
Maximum Load with External Rectifier and Battery Inputs: 40 amps
Regulation: Line: ± 1 %, Load: ± 2 %
Ripple: ± 1 %
Power Scaling via Back Panel Quick Connects
External Rectifier Input: 24V, 48V only; 560 or 1,000 watt (see PM Series)
External Battery Bank: 12V/24V/48V
Temperature Rating: -10° to + 60° C; Derate linearly from 100% load @ 50° C to 75% @ 60° C
Rack Size: 19″ or 23″, 2 RU (3.5″)
Cooling: Forced Air
Dimensions: 3.5″H x 17″W x 18″D
Weight: 33 Lbs. (with batteries), 17 Lbs. (without batteries)
- Current Limit, Short Circuit
- Over Voltage
- Auto Thermal Shutdown/Recovery
- Input Fuse and Circuit Breaker
- Circuit Breaker For Internal Battery
- Low Voltage Battery Disconnect (Adjustable)
Type: 12 Volt, 5 A-H Sealed Lead-Acid, Maintenance-Free
Amp-Hour Capacity: See Matrix below
Weight: 4 Lbs. each; 4 Batteries per Unit
Approvals: UL Recognized, DOT and IATA, approved for shipment by air
Constant Current Performance (Amps) to 1.75 VPC
|MODEL||5 MIN.||15 MIN.||30 MIN.||1 HR.||2 HRS.|
Indicators and Alarms
System “Nominal” indicator lights:
- AC OK
- External Rectifier ON/OK – Except IPS-12-40
- Internal Rectifier On/OK
- Battery Contactor Closed
System “Warning” indicator lights:
- Check System
- Battery Disconnected
Form C Alarm Contacts:
- Summary Failure
- AC Input Failure (Optional)
Digital Voltmeter/Ammeter on the front panel of the IPS may be used to monitor either system voltage (to the nearest 1/10 volt) or total rectifier (internal and/or external) output current (to the nearest amp). Meter accuracy is 1.6% ± one digit. Note: The meter does not indicate current coming from the battery.
Top View With Cover Removed
AC Input Fail Contacts – Specify 115 or 230 VAC
Rectifier/Battery Input Cable Assembly (Model CA-24)
Rear Support Bracket for Flush Mounting Models: RSB-19 or RSB-23
DST-10 (UL), DST-20A (UL)
Unit Supplied Without Batteries